Stage 2 Hop-Up Kit

 Stage 2 Kit- (for the Honda GX200 and Predator 6.5hp engines only)

This kit reliably turns your 6.5hp into approx. 12+hp! With some simple bolt-on modifications, and governor removal you will notice some nice gains. You will see gains in speed, power, and have an even more unbeatable power to weight ratio over stock. This is strickly a do-it –yourself kit.  If you are not comfortable changing valve springs, removing your flywheel or other things of that nature we reccomend having your small engine mechanic install the kit for you. For most shops it should only be a 1.5-2 hour job.  For those that want to tackle the install yourself, its not too difficult and there is plenty of videos on Youtube to help with instruction.

Not sure if this kit is right for you? Give us a call and fill us in on your set up! Just for refrence , we have seen speeds from 18-21mph on 1236 and 1436 jon boats with ligth loads.

Kit does void all engine warranties but does NOT void the warranty on your PPF frame.

The kit includes-

-billet air filter adapter

-aluminum choke holder

-K&N style air filter

-smaller fan

-.625 bored carb

-18lb valve springs

-head pipe and muffler, w/ support bracket

-valve cover gasket

-carb gasket

-8 degree timing key

-Outerwears pre-filter

-SOX throttle linkage kit (this makes hooking up the throttle a breeze after removing the governor)

- valve cover breather

** We run the stock flywheels, simply to keep that extra rotating mass, and as far as risk of flywheels exploding on the Predators (anything is possible) But as long as the prop is in the water you simply won't reach high enough RPM's to do this type of damage unless the flywheel has an actual casting flaw.  It's different story if you're holding the throttle pinned while the prop is out of the water for long periods. Thats where common sense comes into play.

Please specify weather you have the GX200, standard Predator (stamped steel valve cover), or the new style "Hemi" Predator with aluminum valve cover.